TG-T1000T Thermal Tape
-
● Good adhesion(Acrylic PSA)
-
● Great reliability
-
● Cost effective with great performance
-
● Easy to assemble
-
● Customization services for different industries
● Good adhesion(Acrylic PSA)
● Great reliability
● Cost effective with great performance
● Easy to assemble
● Customization services for different industries
It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.
Application
Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.
Li98C | Li98CN | TG-T1000 | TG-T1000T | |
---|---|---|---|---|
Thermal Conductivity | 1.9 | 2.1 | 1 | 1.3 |
Dielectric Breakdown | ≥2 | ≥5.1 | ≥3 | ≥4 |
Thermal Conductivity Thermal conductivity refers to the ability of a given material to conduct/transfer heat. |
||
Dielectric Breakdown Voltage Dielectric breakdown is the failure of an insulating material to prevent the flow of current under an applied electrical stress. |
Property table
Properties | Unit | TG-T1000T | Tolerance | Test Method | ||
Thermal Conductivity |
W/m•K |
1.3 |
±10% |
ASTM D5470 Modified |
||
Thickness |
mm |
0.11 |
– |
ASTM D374 |
||
Color |
– |
Gray |
– |
– |
||
Reinforcement Carrier |
– |
PET |
– |
– |
||
Operating Temperature |
°C |
-40~+120 |
– |
– |
||
Short time Use Temperature(30sec) |
°C |
200 |
– |
– |
||
Density |
g/cm3 |
1.5 |
– |
ASTM D792 |
||
Initial Tack |
cm |
24 |
– |
PSTC-6 |
||
Holding Power 1000g @25° Cusing 1 in2 |
min |
>1000 |
– |
PSTC-7 |
||
180° Peeling Strength (Aluminum) |
N/25mm |
≥7 |
– |
ASTM D3330 |
||
Dielectric Breakdown Voltage (AC) |
KV |
≥4 |
- |
ASTM D149 |
||
Thermal Impedance @10psi |
°C*in2/W |
0.68 |
|
ASTM D5470 Modified |
||
Thermal Impedance @30psi |
°C*in2/W |
0.66 |
– |
ASTM D5470 Modified |
||
Thermal Impedance @50psi |
°C*in2/W |
0.65 |
– |
ASTM D5470 Modified |
||
●Need Samples? ●Die-cut for different shapes ●Roll type available |
||||||
●T-Global guarantees a 6-month shelf life at maximum continuous storage. Storage temperature should be under 25℃ to maintain controlled adhesion to the liner. |
(The above table is only for reference. For the lastest SPEC please press DATASHEET button for download)
Related materials Recommended
-
●Features
-
●Good adhesion(Acrylic PSA)
-
●Great reliability
-
●Cost effective with great performance
-
●Easy to assemble
-
●Customization services for different industries
It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.