TG-A20KX 高性能導熱矽膠片

●導熱良好

●不易變形

●施工性佳

以矽膠為基材，添加導熱粉、阻燃劑等各種輔材，通過特殊工藝合成的一種導熱介面材料。能有效減少熱源表面與散熱器件接觸面之間產生的接觸熱阻。

是T-Global 2020年研發的新產品,為導熱係數2.0 W/m•K,的導熱矽膠片,導熱係數特性是不易變形好施工,擁有良好導熱效能且雙面具自黏性不須另外背膠,能有效減少熱源表面與散熱器件接觸面之間產生的接觸熱阻。

Datasheet

SDS

REACH

加入詢價車及樣品索取

產品應用

適用於中低功率產品
目前因應電動車產業的崛起此導熱矽膠片可廣泛應用在車用產業上,像是車燈,車投影燈都使用眾多。

Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.




將保護膜撕下 Tearing off the release paper.	將導熱矽膠片輕壓至熱源上 Gently attach the thermally conductive silicon pad to the heat source.	撕除保護膜 Remove the protective film	蓋回散熱器或散熱片 Apply components onto the exposed part and apply pressure at fixture.

	TG-A20KX	TG-A2200	TG-A3500	TG-A38KX	TG-A4500
導熱係數 Thermal Conductivity	2.0	2.2	3.5	3.8	4.5
耐電壓 Dielectric Breakdown	≥12	≥13	≥13	≥10	≥10
軟硬度 Hardness (Shore OO)	55	15	35	60	50

	TG-A6200	TG-A1250	TG-A1450	TG-A1660	TG-A1780
導熱係數 Thermal Conductivity	6.2	12.5	14.5	16.6	17.8
耐電壓 Dielectric Breakdown	≥10	≥10	≥8	≥7	≥8
軟硬度 Hardness (Shore OO)	50	55	55	65	70

		導熱係數 Thermal Conductivity 導熱係數是指材料傳導/傳遞熱量的能力。 Thermal conductivity refers to the ability of a given material to conduct/transfer heat.
		耐電壓 Dielectric Breakdown Voltage 耐電壓是指絕緣材料在施加電壓時能夠承受的電流指數。 Dielectric breakdown is the failure of an insulating material to prevent the flow of current under an applied electrical stress.
		軟硬度 Hardness 軟硬度的數字越高表示材料越硬。 Higher numbers on the scale indicate a greater resistance to indentation and thus harder materials.

物性表

物性	單位	TG-A20KX	公差	測試方法
導熱係數 Thermal Conductivity	W/m•K	2.0	±10%	ASTM D5470 Modified
厚度 Thickness	mm	0.3~ 10.0	–	ASTM D374
厚度 Thickness	inch	0.012~ 0.394	–	ASTM D374
顏色 Color	–	深灰 Dark Gray	–	Colorimeter CIE 1976
補強材 Reinforcement Carrier	–	–	–	–
耐燃等級 Flame Rating	–	V-0	–	UL 94
耐電壓 Dielectric Breakdown Voltage	KV/mm	≥12	–	ASTM D149
重量損失 Weight Loss	%	<1	–	ASTM E595 Modified
密度 Density	g / cm³	2	±5%	ASTM D792
工作溫度 Operating Temperature	°C	-40~+180	–	–
體積阻抗 Volume Resistivity	Ohm-m	3x10¹²	–	ASTM D257
延展率 Elongation	%	160	–	ASTM D412
標準規格 Standard Format	–	單片狀 Sheet	–	–
硬度 Hardness	Shore OO	55	±8	ASTM D2240
●小於T1.0mm 厚度，考量過軟不易從底紙拿起，調整軟硬度50~75 利於產線使用 For thicknesses less than 1.0mm, hardness will be adjusted to 50-75 Shore OO to facilitate effective removal of liner during production ●依選用厚度適用不同公差值 Different tolerances according to the selected thickness ●樣品需求? Need samples? ●可依需求冲型裁切 Die-cut for different shapes