Thermal Interface Material

Thermal Tape

Li2000A Thermal Tape
Li2000A Thermal Tape
Li2000A Thermal Tape
Li2000A Thermal Tape

●Silicone PSA  

●Good adhesive

●Long time use temperature of 170°C  

●UL compliant 

●Electrical insulation


It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.

Application

Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.

Property table

Properties Li-2000 Li2000A Unit Tolerance Test Method
Thermal Conductivity

1.3

1.3

2.1

W / mK

±0.17

ASTM D5470

Thickness

0.15

0.25

0.2

mm

ASTM D374

Color

White 

Visual

Reinforcement Carrier

Fiberglass mesh

Continuous Working Temperature

-45~170

-45~170

-45~170

°C

Short time Use Temperature (30sec)

288

288

260

°C

Density

1.6

1.6

2.3

g / cm3

ASTM D792

Initial Tack

10

10

>30

cm

PSTC-6

Lap Shear Strength

74

76

35

N / cm2

D1002

Die Shear Strength @25°C 

113

126

60

N / cm2

Die Shear Strength @80°C 

80

85

50

N / cm2

Die Shear Strength @150°C 

30

35

40

N / cm2

Holding Power 1000g@25°C using 1 in2

>40000

>40000

>40000

min

PSTC-7

Holding Power 1000g @80°C using 1 in2

>40000

>40000

>40000

min

PSTC-7

Holding Power 1000g @150°C using 1 in2

>10000

>10000

>10000

min

PSTC-7

Tensile Strength

450

650

psi

ASTM D412

Dielectric Breakdown Voltage (Vac) 

2

3.1

3.6

KV

±10%

ASTM D149

Dielectric Breakdown Voltage (Vdc)

3.1

4.1

4.6

KV

±10%

ASTM D149

Volume Resistance

>1012

>1012

>109

Ohm- cm

ASTM D257

Thermal Impedance @ 10psi

0.68

1.13

0.69

°C-in2/ W

ASTM D5470

Thermal Impedance @ 30psi

0.66

1.10

0.53

°C-in2/ W

ASTM D5470

Thermal Impedance @ 50psi

0.61

1.04

0.49

°C-in2/ W

ASTM D5470

Flame Rating

V-0

V-0

V-0

UL 94

●Compliance with REACH  ●Compliance with RoHS  ●Compliance with UL

●Need samples?

●Pre-cut for different shapes

●Roll type is  available

●T-global guarantees a 6-month shelf life at maximum continuous storage temperature of 25 ℃ for maintenance of controlled adhesion to the liner.

(The above table is only for reference. For the lastest SPEC please press DATASHEET button for download)

Related materials Recommended

Li2000 Thermal Tape

●Silicone PSA  

●Good adhesive

●Long time use temperature of 170°C  

●UL compliant 

●Electrical insulation


It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.

Submit
Liv2 Thermal Tape

●Great thermal conductivity 

●Good adhesion (Acrylic PSA)

●Great reliability 

●Easy to assemble 

●Customization services for different industries


It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.

Submit
Li98P Thermal Tape

●Great thermal conductivity 

●Good adhesion (Acrylic PSA)

●Great reliability 

●Easy to assemble 

●Customization services for different industries


It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.

Submit
TOP